Search found 38 matches

by SiLeNcEbOnE
Sat Feb 17, 2018 5:36 am
Forum: TECH: 4A-GE ENGINE
Topic: 16an or 20an?
Replies: 0
Views: 281

16an or 20an?

So as I am finishing up my current build. (4age-t 16v big port) It comes down to the radiator. Would 16an be enough or should I use 20an? 16an are actually 1" or 25.4mm and 20an is 1-1/4 or 31.75mm. The necks on the engine are 30-32mm. I had purchased a radiator that already had 16an fitted on ...
by SiLeNcEbOnE
Fri Oct 27, 2017 7:57 am
Forum: TECH: 4A-GE ENGINE
Topic: Turbo manifold question
Replies: 1
Views: 319

Turbo manifold question

A little info about my engine. 4age bigport stock head. 11.0 comp pistons, stock size not oversized. precision 6262. ARP all around. In a starlet fwd. Just to drag race. not street intended. Looking to make around 300hp. I was on the lookout for a manifold to purchase. I found one that was on sale. ...
by SiLeNcEbOnE
Tue Apr 18, 2017 5:02 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGTE Race Engine
Replies: 9
Views: 2089

Re: 4AGTE Race Engine

i dont really have a specific budget, cz it will not be built in a month. will be a long term project, so ..... Are you going to be using pump gas or any type of racing fuel? I am thinking of pump gas with race fuel additive If you're really willing to spend a bunch of money then you might want to ...
by SiLeNcEbOnE
Tue Apr 11, 2017 6:44 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AGTE Race Engine
Replies: 9
Views: 2089

Re: 4AGTE Race Engine

hachirokkos wrote:i dont really have a specific budget, cz it will not be built in a month. will be a long term project, so .....

Are you going to be using pump gas or any type of racing fuel?
by SiLeNcEbOnE
Tue Apr 11, 2017 5:17 am
Forum: TECH: 4A-GE ENGINE
Topic: Build question
Replies: 4
Views: 1160

Re: Build question

I understand. But I don't have the pistons yet so no way to try out your suggestion. But maybe i'll just get them and see how it goes from there. BE CAREFUL...... many aftermarket piston companies list static compression ratios for their pistons... and they are frequently WRONG! What you want to kn...
by SiLeNcEbOnE
Sun Apr 09, 2017 12:12 pm
Forum: TECH: 4A-GE ENGINE
Topic: Build question
Replies: 4
Views: 1160

Re: Build question

I understand.
But I don't have the pistons yet so no way to try out your suggestion.
But maybe i'll just get them and see how it goes from there.
by SiLeNcEbOnE
Fri Apr 07, 2017 3:39 am
Forum: TECH: 4A-GE ENGINE
Topic: Build question
Replies: 4
Views: 1160

Build question

Wanted to ask if it is possible to run 11.0 pistons with 16v bigport without needing to do anything to the head? So basically if it's possible to run stock head without needing to upgrade anything in it. If it will run without a problem. I have read somewhere that with the compression that high you ...
by SiLeNcEbOnE
Sun Jan 10, 2016 5:48 pm
Forum: TECH: 4A-GE ENGINE
Topic: what 20v camshaft to use
Replies: 13
Views: 1850

Re: what 20v camshaft to use

So we decided to complete this build as it is, only thing we are going to swap is the rods. We want to see how this works out before thinking of acquiring a stroker kit and going dry sump. Going with MRP rods. But we still need those cams, so let me know the price on those cams. So we can get that d...
by SiLeNcEbOnE
Sat Jan 09, 2016 10:52 am
Forum: TECH: 4A-GE ENGINE
Topic: what 20v camshaft to use
Replies: 13
Views: 1850

Re: what 20v camshaft to use

No problem If you decide to upgrade let me know how far you want to take it. One very important thing at this level is pairing the right components. It's not just slapping random parts together and making crazy power. That is of course true for all builds but the more extreme it becomes the more cr...
by SiLeNcEbOnE
Fri Jan 08, 2016 1:52 pm
Forum: TECH: 4A-GE ENGINE
Topic: what 20v camshaft to use
Replies: 13
Views: 1850

Re: what 20v camshaft to use

I just had a long talk with TED components trying to get a recommendation on a cam and it reinforced my thought that your parts list is pretty light for your goals. Ideally it would be a huge benefit to increase displacement. This is going to help spool, response and HP/PSI. You could add a little ...
by SiLeNcEbOnE
Thu Jan 07, 2016 3:06 pm
Forum: TECH: 4A-GE ENGINE
Topic: what 20v camshaft to use
Replies: 13
Views: 1850

Re: what 20v camshaft to use

I am the primary distributor of TED components so if you have any questions feel free to let me know. I would definitely go with them over Toda. I generally would but for your particular application I think that TED will have much better grinds for you. Which one will be best still depends on your ...
by SiLeNcEbOnE
Mon Jan 04, 2016 5:04 am
Forum: TECH: 4A-GE ENGINE
Topic: what 20v camshaft to use
Replies: 13
Views: 1850

Re: what 20v camshaft to use

All the way to Toda mate. http://www.todaracingusa.com/catalog/pc/viewCategories.asp?idCategory=127 If you want to push to limits, get 304/9.2mm in 304/8.5 mm ex Full racing spec, and "sweet range" at high rpm Sent from my SM-G900F using Tapatalk I saw that those are the highest cams avai...
by SiLeNcEbOnE
Sun Jan 03, 2016 10:07 am
Forum: TECH: 4A-GE ENGINE
Topic: what 20v camshaft to use
Replies: 13
Views: 1850

what 20v camshaft to use

So a friend of mine is building his 20v. A bit about this build. 9.0:1 compression 81.5mm cp pistons Brian Crower rods Complete supertech valvetrain, 1mm oversize valves, guides, lock keepers, retainers etc.. Adjustbale cam gears Complete with ARP studs Precision 6262 Now we gotten to the question o...
by SiLeNcEbOnE
Sat Jan 02, 2016 11:00 am
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

A local white/silver EP8x with a stockblock 5E-E just hit 220whp using a "disco potatoe" limited to 16psi on a 3 gallon street gasoline to 1 gallon vp16 mix. Admittedly, he reground the stock cam, did the cylinder head and installed a full-on Aeromotive external fuel pump and kit.... But ...
by SiLeNcEbOnE
Wed Aug 19, 2015 10:48 am
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

Something is really wrong with these numbers, 550cc injectors should max out around 260whp on e85 not 196 whp on stock fuel pressure, 750cc injectors should net you about 350whp at stock fuel pressure before you run out of injectors 2 cars were dyno'd and both had 4efte engines... No 4age in them.....
by SiLeNcEbOnE
Thu Aug 13, 2015 8:17 pm
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

Mate ask your tuner what duty cycle the injectors are running, you can't be using that amount of fuel on this build ! Sent from my iPhone using Tapatalk He recommended it. I'm going to run c85 fuel.. It requires 30% more compared to c16. Why it needs bigger injectors.. For example today we dynod a ...
by SiLeNcEbOnE
Tue Aug 11, 2015 8:17 am
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

Again 2, 3, 4 or 5 pumps are only used when your single pump cannot sustain the flow or pressure your fuel system requires, thus far i think your tuner is wrong and is misleading you. Based on your current powerr levels you are not maxing out your single pump. Getting two pumps and keeping the 880c...
by SiLeNcEbOnE
Thu Jun 11, 2015 7:24 am
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

If your current pump isn't maxed out then a second pump won't give you the extra fuel you are looking for. 880cc injectors should be good for about 380 whp on e85. How much power you looking for ? Haven't really looked into the master power turbo's I'm actually going another setup, in the rolla I r...
by SiLeNcEbOnE
Mon Jun 08, 2015 7:10 pm
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

Keep updates coming. Good luck. New chassis will do wonders for new times. Local ep82 with silver top 20v and 4agze pistons with a Borg Warner s252 on 26 psi is currently running consistent 11.5's I was thinking of getting a garrett 60-1. I don't want to spend to much on a turbo but don't want a ch...
by SiLeNcEbOnE
Wed Jun 03, 2015 7:29 am
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

Keep updates coming. Good luck. New chassis will do wonders for new times. Local ep82 with silver top 20v and 4agze pistons with a Borg Warner s252 on 26 psi is currently running consistent 11.5's I was thinking of getting a garrett 60-1. I don't want to spend to much on a turbo but don't want a ch...
by SiLeNcEbOnE
Thu May 28, 2015 1:54 pm
Forum: TECH: Corolla FWD / MR2
Topic: My ae92 4age-t
Replies: 30
Views: 7619

Re: My ae92 4age-t

Have you taken it back to the track yet ? No took the engine out and it's now sitting in a ep82 starlet. http://i.imgur.com/KxwpKbGl.jpg http://i.imgur.com/PAW4eUOl.jpg http://i.imgur.com/wjy3sAwl.jpg Car weighs less so should see better numbers.. There should be a big event end of august, trying t...
by SiLeNcEbOnE
Sat Mar 07, 2015 8:04 pm
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Re: Can these be blocked of

What car is it? AE92? This is an AE92 thermostat housing, it mounts over the C52 gearbox http://i375.photobucket.com/albums/oo199/killar_of_giants/AE92thermostathousing.jpg Was in a ae92 and that's whats missing. I thought maybe someone could of pointed it to be somewhere else. Sent from my iPad us...
by SiLeNcEbOnE
Wed Mar 04, 2015 9:10 pm
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Re: Can these be blocked of

an engine without a thermostat will never overheat... Ofcourse but the engine did go up to 190f so i thought it had a thermostat because without one it wouldn't go so high just at idle. But it did. So if didn't have one why would it go up to 190f? It was running with a 3 core civic radiator and fan...
by SiLeNcEbOnE
Wed Mar 04, 2015 6:02 pm
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Can these be blocked of

Try to teach a man to fish and he will hate you for a lifetime. There is enough information just in this thread and links contained within to answer your outlet question if you wanted to actually try to understand the system. If you had trouble finding the solution I could help you try to find the ...
by SiLeNcEbOnE
Tue Mar 03, 2015 12:56 pm
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Re: Can these be blocked of

YES as already said here you can block it off. You could have at least figured out the name of what you were talking about so we didn't have to guess by pictures. But I am still quite confident that Google would have answered your questions faster had you really wanted. More importantly if you did ...
by SiLeNcEbOnE
Tue Mar 03, 2015 10:19 am
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Can these be blocked of

YES as already said here you can block it off. You could have at least figured out the name of what you were talking about so we didn't have to guess by pictures. But I am still quite confident that Google would have answered your questions faster had you really wanted. More importantly if you did ...
by SiLeNcEbOnE
Tue Mar 03, 2015 9:42 am
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Can these be blocked of

This is why i'm asking sir, i'm here to learn. I want to know if it is possible to block it off. Why are you being that way? If i can't come here and ask questions then i"ll go away if i'm bothering you. Sent from my iPhone using Tapatalk It's not that you are asking questions or that you are ...
by SiLeNcEbOnE
Tue Mar 03, 2015 8:16 am
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Re: Can these be blocked of

Drag car sir. Not street or drift intended. This would be important to say in your initial post. The purpose of the car will effect what you can and cannot do. That is why i took pictures because i do not know what their purpose are or what name they gave them. I thought it might of been hose for t...
by SiLeNcEbOnE
Tue Mar 03, 2015 7:40 am
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Can these be blocked of

If you can't name the items you are trying to modify you are better off leaving them as they came from the factory. That is why i took pictures because i do not know what their purpose are or what name they gave them. I thought it might of been hose for the heater or some sort but was not sure I wo...
by SiLeNcEbOnE
Sun Mar 01, 2015 12:02 pm
Forum: TECH: 4A-GE ENGINE
Topic: Can these be blocked of
Replies: 20
Views: 2533

Can these be blocked of

Hi see in pictures. Can i block those of? http://tapatalk.imageshack.com/v2/15/03/01/292d8fa2f7a0cac71161519ce88bfe32.jpg http://tapatalk.imageshack.com/v2/15/03/01/73810b7ea1ee2f7c504902b8c740d1a6.jpg http://tapatalk.imageshack.com/v2/15/03/01/19d12d1210cab762eb6b4f1ce5e5ca21.jpg Want to block the ...

Go to advanced search