SOLD .......

Thanks for the interest

Orange county,Ca (714)421-0800

1-7 rib short block with a balanced crank ,Powder rods , MAHL pistons. $200.00 1-7 Rib long block with small port head. $200.00 stock engine.

I have a 7 rib block that has a crank, H beam rods ,Mahle pistons.

Hello im looking for an Electromotive XDI ignition, also looking for a coil pack. In good working condition

I'm building a 7age. I will be using a 16v small port head with an oil drain. I was thinking about putting a welded bung in the aluminum part of the oil pan. running the drain from the head into the oil pan. I was wondering if any one has done this. The head is coming off of a 4 age block that did n...

Fat performance makes the intake manifold the carb I have is a 44 webber IDF

oldeskewltoy wrote:Which head are you planning on using??

I will be using a small port head

You described exactly what I'm looking for with the power. I will be in touch when I get ready for parts. Thanks

44 Webber Its a bit to big for the stock engine, this is the way it came when I bought it.

Looking to get some input on a 7AGE build. This motor will go in an off road car looking to get as much torque as I can,with at least 170 HP. I would like to be able to run the engine on pump gas.I will be using a 16v small port head , an Electromotive ignition and a single down draft webber. I'm cu...

I have a 16v red top 4 age. did the fwd cars come with a harmonic balancer that has a smaller outside pulely. I have seen pictures but I cant seem to find one. My other option if they are available would be an under drive pulley. My outside pulley drives my power steering pump,I have the largest ava...

I'm also interested in the head if its a small port.

Does anybody have any experience with Scorcher distributors. I was looking at different options and ran across them.

Is this possible. Ive heard it is, but cant seem to find any info on it.

I have a 4AGE small port 16v engine with a single 44 webber and a header. This engine is in an off road buggy,I was wondering what RPM'S you have at cruising speed. The car performs well above 2500 rpm's and runs strong to over 6000. I will often run it at 4500 to 5500 for long periods of time. I wa...

I have an exhaust manifold off of a 1990 16v red top engine . let me know if it will work for you.

Looking to buy a complete 4 AGE 16 valve small port engine running or not. Also looking for a small port head.