Search found 330 matches

by aukword1
Wed Jan 10, 2018 5:51 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

So it's been a while since I updated. Basically I decided to go the ITB route and spent way too much money doing so. Bought SQ engineering ITB adapter plate for the 20v AE111 ITB's, SQ engineering 100mm velocity stacks, a generic chinese made vacuum block, a Link G4+ ECU with expansion loom, pipercr...
by aukword1
Tue Jan 02, 2018 8:50 am
Forum: TECH: 4A-GE ENGINE
Topic: Supercharging 4age....can I get away with?
Replies: 1
Views: 75

Re: Supercharging 4age....can I get away with?

Of course you can. I'd suggest running a water/methanol injection kit to keep the air cooled during boost and you should be just fine.
by aukword1
Thu Dec 28, 2017 7:25 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

ah you had one of these engines before. You should've kept it! Anyhow, I found out that the problem is the o2 sensor so I have to go pull one from the junkyard tomorrow. Should be idling soon, can't wait!
by aukword1
Wed Dec 27, 2017 7:20 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

Thanks I will try that next time and eventually change out the pics on this thread with better links. So small update, the engine cranks and starts but then immediately dies. Still trying to troubleshoot it but it seems to be most likely a fuel issue. I will try some more things later this week to s...
by aukword1
Thu Dec 21, 2017 7:20 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

I don't think the older S gen motors will work with the mounts. The blocks are a bit different. I know they share a few parts between them but you can just get this instead https://www.ebay.com/itm/JDM-Toyota-Altezza-3SGE-TURBO-RS200-IS300-Beams-Dual-VVTI-ENGINE-6spd-Mt-ECU/253322496591?epid=6552763...
by aukword1
Wed Dec 20, 2017 2:33 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

Alright I know it's been a while but i've been busy. Here is a small update of what I've been up to. https://s20.postimg.org/u3wqt903t/20171202_174457.jpg I hooked up the intake along with the MAF sensor. The intake is an APEXI one I bought from nengun performance. The things were backordered by 3 m...
by aukword1
Wed Dec 20, 2017 8:59 am
Forum: TECH: Corolla AE86
Topic: 3SGE Beams Header Routing
Replies: 8
Views: 819

Re: 3SGE Beams Header Routing

Battle Garage will be coming out with a header for the beams 86 swap soon. They posted it on their facebook page.
by aukword1
Wed Dec 20, 2017 7:39 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 154
Views: 10068

Re: CloudStrife's AE88

Just a side note, you can buy just the aw11 distributor cap from autozone for like $10 and use it on your stock 4age distributor.
by aukword1
Fri Dec 08, 2017 9:07 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 154
Views: 10068

Re: CloudStrife's AE88

that sucks man, hope you get everything sorted out.
by aukword1
Thu Dec 07, 2017 1:06 pm
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 154
Views: 10068

Re: CloudStrife's AE88

looking great man! I'm jealous of those rear brakes lol I can't commit to that brake kit yet until I figure out what rear axle I'm going to go with. Also, You can adjust the e-brake cable from the e-brake itself. It might give you enough slack to link it. You can always ask Gabe or one of the guys a...
by aukword1
Wed Dec 06, 2017 3:25 pm
Forum: OWNERS and BUILDERS
Topic: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p
Replies: 139
Views: 14776

Re: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p

Glad you are happy with the project thus far. It is looking great btw. I'd be interested to see what the dyno numbers are with a smaller SC pulley. Also, you can probably run a larger crank pulley to add even more boost like the 4agze guys do. Anyhow good luck with it all!
by aukword1
Wed Nov 29, 2017 9:59 am
Forum: Want to BUY (seeking sellers)
Topic: wtb: PS kunckles and tie rod ends
Replies: 1
Views: 95

Re: wtb: PS kunckles and tie rod ends

I have both for sale. Check my post in the classifieds.
by aukword1
Fri Nov 17, 2017 11:01 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

Forgot to add these pictures previously... https://s7.postimg.org/b6gnsqw7r/20171117_104518.jpg So this is how I modified the fuel rail. I have the return line hooked up to the front of the fuel rail with a fuel pressure regulator between the rail and the hard line. https://s7.postimg.org/6kkjkfkzb/...
by aukword1
Thu Nov 16, 2017 7:34 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

Small update, got some formed hoses to fit with the koyorad beams swap radiator. Part numbers included in case anyone else is doing the same combo. https://s8.postimg.org/rm7rd2dap/20171116_174948.jpg This one fits perfectly with JSPfab's thermostat housing and the koyorad radiator. No cutting neces...
by aukword1
Fri Nov 10, 2017 8:15 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

Alright, time for a new update! I've been sick for the last week so I haven't really felt like working on the car but made quite a bit of progress the last couple days... https://s17.postimg.org/n1xznnsm3/20171030_140049.jpg Hooked up the fuel lines to the rail. https://s17.postimg.org/4z4wwg4h7/201...
by aukword1
Fri Nov 10, 2017 8:02 pm
Forum: TECH: Corolla AE86
Topic: Trying to find the best rear differential for my BEAMS AE86
Replies: 4
Views: 601

Re: Trying to find the best rear differential for my BEAMS AE86

Gonna have to swap or get that weir kit. Have you called weir? I talked to them a few months back and they said they can make them per order.
by aukword1
Thu Nov 09, 2017 11:38 am
Forum: TECH: Corolla AE86
Topic: Where to find LHD floor mats? (non OEM ok)
Replies: 9
Views: 1259

Re: Where to find LHD floor mats? (non OEM ok)

you got a link to their facebook?
by aukword1
Tue Nov 07, 2017 7:44 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 154
Views: 10068

Re: CloudStrife's AE88

It's a folded sheet steel bracket and the holes will have been punched out. That's why you get a bit of a taper on th holes and the brackets can be less than perfect. Just file the holes out a fraction to get rid of the lip and slide that tube in there :-D Cheers... jondee86 That's basically what I...
by aukword1
Thu Nov 02, 2017 7:50 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

The JSP mount kit does come with two options, one in a forward mounting position and one that mounts the engine towards the rear more. I went with the rear mounting position. In the rear mounting position with the sunframe spacers you do not need to modify the oil pan or the sway bar at all. Current...
by aukword1
Sun Oct 29, 2017 8:53 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB 4ag 20v ITBs blacktop ae111
Replies: 1
Views: 153

WTB 4ag 20v ITBs blacktop ae111

Title says it all...pm me if you have a set for sale. Thanks!
by aukword1
Fri Oct 27, 2017 1:27 pm
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 154
Views: 10068

Re: CloudStrife's AE88

Let me check when I get home, I'm looking at the Aisin CMC's and i'm thinking maybe it only had one stud possibly lol. I changed it out like 6 years ago so I don't really remember well. I will check in a few hours though.
by aukword1
Fri Oct 27, 2017 11:57 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 154
Views: 10068

Re: CloudStrife's AE88

I purchased an Aisin clutch master a couple years ago and it had two mounting studs. Maybe they sent you the wrong one?
by aukword1
Fri Oct 27, 2017 9:35 am
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 148
Views: 17031

Re: notnilc20's 1986 ae86 Hatch build/restoration

looking and sounding good man, I love your paint job. Where did you get the body kit from? The fitment shouldn't be that far off I would think.
by aukword1
Fri Oct 27, 2017 7:34 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 154
Views: 10068

Re: CloudStrife's AE88

That is odd, I never came across that issue. Do you have any slack in the spring when you jack up the front end? You should just be able to screw the base when the spring sits up or down to adjust the height. There is a set screw that holds it in place but it seems like your issue might be the sprin...
by aukword1
Sun Oct 22, 2017 7:57 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

Alright, So I finished painting some parts. https://s20.postimg.org/3qyufemjd/20171022_120503.jpg Also, I finished the headers and got them hooked up to the exhaust. By far this was the most difficult part of the whole swap so far. Parts for the header costed about $200 just for the bent steel neede...
by aukword1
Sat Oct 21, 2017 6:08 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 31
Views: 1671

Re: Aukword1's Beams Swapped AE86

Small half weekend update. Here is my temporary attempt at headers. https://s20.postimg.org/trgtrkimx/20171021_114400.jpg I re-attached the core support. https://s20.postimg.org/dt841fgp5/20171021_114906.jpg Also, I painted the bottom windshield cover and those vents that attach under it by the wind...
by aukword1
Wed Oct 18, 2017 3:30 pm
Forum: Fun Talk
Topic: Need a price reference
Replies: 17
Views: 940

Re: Need a price reference

personally I'd pay around 8k for it but I'm sure the guy is asking around 14k or something lol
by aukword1
Sat Oct 14, 2017 9:54 pm
Forum: TECH: Corolla AE86
Topic: Beams swap question
Replies: 6
Views: 543

Re: Beams swap question

The wife says for the flywheel the torque is 107.8 nm which converts to 79.5 ft lbs. Hope that helps!
by aukword1
Sat Oct 14, 2017 9:45 pm
Forum: OWNERS and BUILDERS
Topic: Tokyo DD EP91 Starlet Turbo
Replies: 26
Views: 1695

Re: Tokyo DD EP91 Starlet Turbo

Ah yea those are them lol...the ones near osaka were green if i remember correctly.
by aukword1
Fri Oct 13, 2017 7:50 am
Forum: OWNERS and BUILDERS
Topic: Tokyo DD EP91 Starlet Turbo
Replies: 26
Views: 1695

Re: Tokyo DD EP91 Starlet Turbo

Very cool stuff, looks like you are having loads of fun. Did you come across any touge's where they lay down those rough patches in the road on the turns? I was in Osaka last year and we went to a popular touge between there and Nara and they ruined it with those. Autobach's is the ****!

Go to advanced search