Search found 391 matches

by aukword1
Fri Apr 20, 2018 7:08 am
Forum: Want to BUY (seeking sellers)
Topic: Front spindle hubs, calipers, and caliper brackets/dust shields.
Replies: 3
Views: 57

Re: Front spindle hubs, calipers, and caliper brackets/dust shields.

I'll sell the hubs and brackets/dust shields for $100
by aukword1
Thu Apr 19, 2018 10:09 am
Forum: AE86 Parts & Accessories
Topic: Stuffs for sale
Replies: 8
Views: 2410

Re: Stuffs for sale

bump - added some parts
by aukword1
Thu Apr 19, 2018 10:01 am
Forum: Want to BUY (seeking sellers)
Topic: Front spindle hubs, calipers, and caliper brackets/dust shields.
Replies: 3
Views: 57

Re: Front spindle hubs, calipers, and caliper brackets/dust shields.

I have the hubs and caliper brackets but I already sold the calipers.
by aukword1
Thu Apr 19, 2018 7:22 am
Forum: TECH: Corolla AE86
Topic: Timing woes and tps'
Replies: 20
Views: 191

Re: Timing woes and tps'

I would make sure the crank is actually TDC by removing the 1st cylinder's spark plug and putting something in there like a stick or something. Once the stick reaches the highest point your at TDC. Then check the cams to make sure they line up at that point. If all that is correct then the distribut...
by aukword1
Thu Apr 19, 2018 7:07 am
Forum: Fun Talk
Topic: AE86 Nights SoCal
Replies: 3
Views: 50

Re: AE86 Nights SoCal

Pretty sure they haven't had one in a while. Your best bet is 86 fest in July at the Auto Club Speedway.
by aukword1
Tue Apr 17, 2018 9:50 am
Forum: TECH: Corolla AE86
Topic: Timing woes and tps'
Replies: 20
Views: 191

Re: Timing woes and tps'

I ran lightweight pulleys in my old G35 for like 10 years with no issues. I also ran T3's pulley on my old 4ag motor for a couple years with no issues either. Personally, I don't know anyone who has had any issues running aftermarket pulleys that ran into excessive bearing wear at the crank.
by aukword1
Tue Apr 17, 2018 7:24 am
Forum: TECH: Corolla AE86
Topic: Timing woes and tps'
Replies: 20
Views: 191

Re: Timing woes and tps'

water pump pulley wont line up as well since the ae86 water pump is longer. If you are still running acc you should just buy a solid crank pulley from T3 or NST, that way you don't have to mess around with machining current pulleys etc.
by aukword1
Mon Apr 16, 2018 12:28 pm
Forum: TECH: Corolla AE86
Topic: Timing woes and tps'
Replies: 20
Views: 191

Re: Timing woes and tps'

The original 4age crank pulley was a two piece that had some rubber piece holding it together. Pretty sure that rubber piece holding it could be the cause of the slippage. Once that starts happening, you better replace the pulley or it will fly off!
by aukword1
Fri Apr 13, 2018 9:42 am
Forum: TECH: Corolla AE86
Topic: Can anyone tell me the horn wires plug wires?
Replies: 10
Views: 137

Re: Can anyone tell me the horn wires plug wires?

I'm pretty sure the horn is supposed to be grounded to the chasis right near the plug independently. It's been so long since I removed the oem horn setup so my memory is fuzzy on it. It does look like you have the right wires for it though.
by aukword1
Fri Apr 13, 2018 7:28 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 63
Views: 4258

Re: Aukword1's Beams Swapped AE86

So this is where I am at now. Having a bit of fitment issues with getting both calipers to line up properly to the rotor. I will have to hit up the hardware store to get some 2 3/4" ID washers to act as spacers and figure out a way to get them both to line up. The quad caliper bracket was desig...
by aukword1
Fri Apr 13, 2018 7:05 am
Forum: TECH: Corolla AE86
Topic: Can anyone tell me the horn wires plug wires?
Replies: 10
Views: 137

Re: Can anyone tell me the horn wires plug wires?

So I checked mine, It looks like it has a green wire with a red stripe and a white one (I think). I have that part of the harness tucked so its hard to see and the engine bay has been painted several times so I could be wrong.
by aukword1
Thu Apr 12, 2018 7:18 am
Forum: TECH: Corolla AE86
Topic: Can anyone tell me the horn wires plug wires?
Replies: 10
Views: 137

Re: Can anyone tell me the horn wires plug wires?

My guess would be that the horn isn't being grounded at some point on the wire loom. I can check when I get home what the colors are for you.
by aukword1
Fri Apr 06, 2018 2:47 pm
Forum: TECH: 4A-GE ENGINE
Topic: OST-048: Спасибо товарищ Сталин
Replies: 8
Views: 192

Re: OST-048: Спасибо товарищ Сталин

lol had to google translate that title. Interested to see how this smallport comes out
by aukword1
Fri Apr 06, 2018 7:15 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 63
Views: 4258

Re: Aukword1's Beams Swapped AE86

It's the aw11 manual rack. Here are some pics of the progress I made last night. It should be ready to go back in the car tonight. https://s20.postimg.org/mo7yrwmb1/20180405_190934.jpg https://s20.postimg.org/4y6a6v10d/20180405_202223.jpg https://s20.postimg.org/e5yinkni5/20180405_202227.jpg
by aukword1
Thu Apr 05, 2018 1:15 pm
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 63
Views: 4258

Re: Aukword1's Beams Swapped AE86

I know it's been longer than a week but I came across a few issues here and there but most of it is sorted out. So first of all, I just got the differential back today. I didn't have the tools to measure pinion depth so it was cheaper for me to outsource that to a diff shop. If you are in the area, ...
by aukword1
Fri Mar 30, 2018 8:48 am
Forum: OWNERS and BUILDERS
Topic: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p
Replies: 172
Views: 20145

Re: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p

Did you notice a significant different after swapping the LCA's? Second video link isn't working btw. Those events look like they are so much fun!
by aukword1
Thu Mar 29, 2018 7:36 am
Forum: TECH: 4A-GE ENGINE
Topic: draw through turbo 4age!
Replies: 14
Views: 517

Re: draw through turbo 4age!

It looks pretty interesting. Can't wait to hear what it will sound like. BTW you can use this website to host images on this forum. https://postimg.org There are plenty of websites ppl use just wouldnt recommend using photobucket cause they're assholes.
by aukword1
Wed Mar 28, 2018 3:52 pm
Forum: TECH: 4A-GE ENGINE
Topic: Ignition key source
Replies: 5
Views: 220

Re: Ignition key source

What are you trying to wire up in the engine bay? I would probably use the EFI main relay but really depends on what you are trying to do.
by aukword1
Tue Mar 27, 2018 11:49 am
Forum: Fun Talk
Topic: what happened to the community
Replies: 64
Views: 9365

Re: what happened to the community

On a lighter side of things, I found out that there is an extension for Chrome that fixes the photobucket link errors. Its called Photobucket hotlink fix and it works great.
by aukword1
Fri Mar 23, 2018 1:41 pm
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 217
Views: 16441

Re: CloudStrife's AE88

Yeah, very easy to do. Unless you are talking about a fwd 20v. That will require some wiring but still not too bad.
by aukword1
Fri Mar 23, 2018 9:01 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 217
Views: 16441

Re: CloudStrife's AE88

Don't give up yet you are very close. I started mine with the same bottom end seizure and been through a lot since then. I'm glad that I didn't give up and get grinding at it. The car with a proper/healthy engine is amazing. Just keep at it!
by aukword1
Tue Mar 20, 2018 11:31 am
Forum: OWNERS and BUILDERS
Topic: notnilc20's 1986 ae86 Hatch build/restoration
Replies: 161
Views: 21149

Re: notnilc20's 1986 ae86 Hatch build/restoration

looks really good, paint came out nice!
by aukword1
Mon Mar 19, 2018 7:29 am
Forum: OWNERS and BUILDERS
Topic: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p
Replies: 172
Views: 20145

Re: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p

Very nice runs, That car is amazing and sounds even better. Looks like loads of fun to drive. Glad everything is running well.
by aukword1
Thu Mar 15, 2018 7:57 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 63
Views: 4258

Re: Aukword1's Beams Swapped AE86

Alright, so I have been a bit busy. I decided to redo the rear axle and put in an LSD unit since the car had an open diff. I figured I might as well paint the rear axle while I wait for a few parts. Here are some before and after pics. https://s14.postimg.org/g3blfezap/20180310_171842.jpg https://s1...
by aukword1
Wed Mar 14, 2018 9:46 am
Forum: TECH: 4A-GE ENGINE
Topic: draw through turbo 4age!
Replies: 14
Views: 517

Re: draw through turbo 4age!

Definitely do it then and document your findings. I'm sure a lot of people on this board would be interested in your progress with this build.
by aukword1
Wed Mar 14, 2018 8:50 am
Forum: TECH: 4A-GE ENGINE
Topic: draw through turbo 4age!
Replies: 14
Views: 517

Re: draw through turbo 4age!

the FPR makes sense if you hook it up to the manifold and can have it send more fuel to the carb under boost. Then you wouldn't need EFI and would just have to manually tune the carb and FPR. Here is a nice write up on how the boost reference FPR works. http://fuelab.com/11-boost-reference-fuel-pres...
by aukword1
Wed Mar 14, 2018 7:42 am
Forum: TECH: 4A-GE ENGINE
Topic: draw through turbo 4age!
Replies: 14
Views: 517

Re: draw through turbo 4age!

Well first thing I would do would be to get an AFR gauge. Then from there you can see what your fuel requirements would be then tune the carb from there. Since you are not running efi I'd imagine you'd have to run the carbs rich. The problem would be when the turbo kicks in it would probably lean ou...
by aukword1
Tue Mar 13, 2018 1:16 pm
Forum: Fun Talk
Topic: AE86 ROAD WARRIOR
Replies: 2
Views: 198

Re: AE86 ROAD WARRIOR

looks like it would be fun to drive. Nice find.
by aukword1
Mon Mar 12, 2018 7:40 am
Forum: OWNERS and BUILDERS
Topic: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p
Replies: 172
Views: 20145

Re: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p

Take some video at the event next week! Lets see that new rubber in action :)
by aukword1
Mon Mar 12, 2018 7:38 am
Forum: OWNERS and BUILDERS
Topic: CloudStrife's AE88
Replies: 217
Views: 16441

Re: CloudStrife's AE88

That is precisely why I swapped my engine. There is a reason why this shirt exists https://technotoytuning.com/toyota/ae86 ... ghts-shirt
I'm sure you will get it figured out. Just takes time and money constantly being thrown at it. lol

Go to advanced search