Went to start my car at work and I turned the key and then felt a click and now the ignition switch just slides around no resistance at all. Suffice to say it wouldn't start with out a push start. Worst of all it's stuck in run mode so I have to disconnect the battery when I'm not driving it. Any id...

So if you see in the my build log my AE86 was drifted into a rock and it messed up the Bumper support on the left side. Well I got a Zenki bumper for it and I had a local body shop re bend it back in place and from the looks of it they did a perfect job. The bumper wont line up with the quarter pane...

Medford or Klamath? I might be able to pick some stuff up!

1. ae86 heater box w/modded core inlet/outlets-$10
2. ae86 fan-$5
5. ae86 interior insulation(behind ecu & junction boxes)-free
25. single window crank(oem black)-$5

Will take all of them! does the heater box have a core?

I could use the vents!

MIne looks like this!

Just the wiper portion, I already have the motor assembly and everything

Hey oregonbro where are you located? Maybe a quick swap?

Look what happened to show up in the mail! I <3 Zenki

15x7 I believe and I am unsure of the offset.

I'll trade them for some Watanabe's

Yessss but just the light ends. I have the car ends on the car.

I need a pair of connectors (and preferably the wiring that goes with them) from the USDM GTS bumper lights. I have a Zenki bumper on order with the lights and I need the connectors to splice on to them.

My fuel gauge doesn't know what it wants to do. It almost never reads full when I fill up the tank(Usually 3/4) and when it is actually 3/4ths it will go down to half randomly and then slowly come back and at empty I...don't...even...know.

Any advice?

How much to ship the B-pillars?

Looking for back seat upper part, I'd in good condition can your post pictures email me if you want pictures, I have the bench and both back rests in very good shape. Could I please buy the front windshield moldings as well as both sides for the rear hatch window moldings please? Condition/ pics? H...

Darn, I have GTS tops and trim.

He asked if the seat top halves would swap from a coupe to a hatch. I said yes, as long as it's going from a gts to gts, or sr5 to sr5 (gts and sr5 seat tops are different shapes). Thats where things get tricky, It's a GTS conversion and everything interior was half assed. So I don't know if I have...

What are the wheel and suspension specs? :D If you don't mind me asking haha Also good luck with the build! Specs? you'll proabably have to be more specific. lol As far as I know though, the rims are Rota Grid-V's wrapped in some no name tires, it has GTS disks all around. The suspension has unknow...

Hey a fellow Oregonian!

I wish you luck on your project!

I recently acquired a 1985 Corolla SR5 with a full GTS conversion. Unfortunately it was drifted into a a rock and god knows what else. She drives straight though. I just had to restore it, kinda compelled I've always wanted an 86 so I grabbed this one, it will be my daily driver so it's going to be ...

Do you have the hatch trim and drivers side trim? Also looking for the bottom part of the hatch that goes over the spare tire. Also what color are the door guards?

My 86 is supposedly on TRD struts in the back and it happens to lean on the rear drivers side pretty decently. I had my suspension checked out by Les Schwab and they said everything seemed fine. I was wondering if the strut was actually blown or leaking, or if for some reason was normal.

Just wondering if anyone has pictures on the set up in the engine, and some installation tips for anyone that has done it.

About to get a Zenki front bumper. Hopefully this goes well!

SidekickChuck wrote:I guess the question is, are you looking to replace the entire seat(s) out? Or are you asking whether you can swap the top halves from one to another?

Just the top halves.

The top half of my hatch's rear seats are completely thrashed and I saw some top halves in amazing condition for sale.

The problem is that they are out of a coupe, they look pretty much just like my hatches top halves. Will they fit?