Yeah I think that will do just fine. Appreciate it man!

Now I can hopefully make this SR5/GTS conversion harness work.

I have been looking everywhere for a accurate pinout so I can hopefully figure out what melted the 2 brown wires on the 7pin plug that goes to AFM.

Anyone happen to have a pinout for that plug?

You have the front body and engine harness?

This I have a feeling this means I don't have a GTS front harness though. So I guess I will that that as well. I have a kouki gts engine harness let me know 9092879529 thanks That does not matter an ecu is an ecu as long as its for a MT 4age 16v large port your fine I guess in that case, I need the...

deftones420 wrote:

fupersudge wrote:This I have a feeling this means I don't have a GTS front harness though. So I guess I will that that as well.

I have a kouki gts engine harness let me know 9092879529 thanks

I have a zenki ecu

This I have a feeling this means I don't have a GTS front harness though. So I guess I will that that as well.

easiest way is to swap the wiring from the whole car front harness engine harness under dash and rear harness it will take me a day or so to get some pics all my parts are in storage right now Max As far as I can tell I still have the sr5 dash harness and possibly chassis harness. But it looks like...

Illegal_Garage wrote:I think I have an extra
$150

Max

Let me know, and shoot me some pictures on here.

As far as I can tell the 4AGE into a SR5 swap doesn't require modification of the engine harness right? Cause the one I have in my lap is a clusterfuck

Looking for all the harnesses needed for sr5 conversion, i already have a zenki ecu and if i dont NEED the dash harness and rear body harness i can do without lol

I am gonna check over some wiring stuff, and friend is coming this weekend probably with a spare ecu and etc.

hopefully I will be able to drive it soon...

Also, is it possible that I blew a relay or something when I bolted up the E01and E02 ground and that's what is causing this issue?

http://i.imgur.com/k3uq9Dp.jpg http://i.imgur.com/mOUjuS8.jpg http://i.imgur.com/jxs4G11.jpg http://i.imgur.com/y9FZ0X8.jpg Not 100% sure what I am looking at inside here. So I took pictures. The brown spots don't look like they are burnt, but like I said... I am not completely sure whats going on....

I am getting roughly 22ohms on the yellow and black wire and 7-8ish on the red and white.

This is on every injector clip...

yoshimitsuspeed wrote:Wiring or ECU. Check continuity from the injector clip to the ECU clip on the FI wires.

How do you do that?

Ok... Checked spark. Appears that all I am getting spark all around. Checked Ohms on injectors, 15/15/15/16 is what I got on those. Appear to be redtop injectors ( tan top ) and from what I read this means I don't need the resistor box. All clips for the injectors are getting 12v as well on both wir...

I let the car idle and I unplugged a buncha **** to see if anything changed. TPS = stalled MAF = stalled Injectors = unchanged on 1 and 2, stalled on 3 and 4. So it looks like the injectors on 1 and 2 are not working. As for what reason, I have no idea. I was told my car had the wrong injectors in i...

What's the compression? Disable one cylinder at a time to find out which are & are not pulling their weight, they gotta be or should be equal, producing equal test results from each one. Compression SHOULD be damn near perfect. Engine has less than 3,000 miles on it. What would be the best way ...

Having a issue with my 16v 4AGE swapped sr5 car. Its ran rough ever since I bought it and I've been trying to fix the issue. I added a EFI Main relay and bolted up the ground on the harness by the ECU that was not bolted up. Now the car idles low and like it has an aggressive cam. Also when I check ...

Ok I have been rebuilding the drums on my half way GTS converted SR5. It has the 9inch varients of the drum brakes though. Anyone have any idea where I can get new auto adjusters and springs for this setup?

Autozone / RockAuto and etc don't have anything I need.

YoShImUrA wrote:Well trap doors is not so bad, but 136 for shipping is, LOL!

I'll stick subscribed to the thread in case other solution comes around. Thanks!

Ima take some parts to a place and get a better estimate. 136 dollars for some interior panels seems like overkill.

What about the other two hatchback trunk panels? I'd be very interested in the left one if it's in good condition! Thanks! I have them and they are not cracked, but I am missing the little trap doors on them. ALSO, I had a rough estimate made by UPS today for shipping... 136 dollars to ship to cali...

Welp, turns out the spark plugs was just not doing as well as they should of been. Was also gapped at .020 instead of .044 or whatever it should be.

Posted more pictures, bump <3

1986 Corolla SR5 with 4AGE blue top. Earlier today I came home from school and started the car just to make sure it ran before I fixed the broken vac tank. Fixed the tank and all that jazz and the car ran like **** for a few seconds. I turned it off and checked to make sure I didn't forget a vac lin...

85z3nki wrote:Could you please. Or even send me a tracing of it.

Yeah I can prolly manage something like that.

Im looking for the particle board in the rear hatch that covers the spare tire, shipped to 60463. LMK thanks It would be cheaper to make one of those than it would be for me to ship it to you. Plus mine is warped and etc from being old. If you like I can measure it for you so you know the size to m...

ElChinoxNJ wrote:Pics of the rear seats. Willing to ship as well 95136? xearthwindandfirex@yahoo.com

Ill get all the pictures later today. If shipping is not outrageous for it I will consider shipping it.

Super interested. If you still have these once my wheels sell I plan on throwing cash at you.

I am going to take a crack at this. If I figure out the whole ordeal Ill post what I have learned.

RLZ wrote:where are you located?

Outside Charlotte in North Carolina.

307(AE86) wrote:How are the door panels?

In decent shape, the driver side has a hole in it though.