Search found 38 matches

by zokustyle
Wed Mar 28, 2018 4:54 pm
Forum: TECH: Corolla AE86
Topic: Swapping Control Arms for a little more Negative Camber
Replies: 7
Views: 669

Re: Swapping Control Arms for a little more Negative Camber

Do I dare be the one to mention NCRCA's on an 86 forum? No changes to tie rods, sway bars, tension rods, caster, or KPI. But I bet someone will want to argue scrub radius over all of that.
by zokustyle
Sat Mar 03, 2018 1:43 am
Forum: OWNERS and BUILDERS
Topic: Aukword1's Beams Swapped AE86
Replies: 77
Views: 7363

Re: Aukword1's Beams Swapped AE86

Why did you limit to 7100? Stock makes peak at 7800. I'm surprised you made 193 not even revving it all the way, interesting. You have a healthy one.
by zokustyle
Sun Feb 25, 2018 11:36 pm
Forum: TECH: Corolla AE86
Topic: Rack spacers on a de-powered zenki PS rack
Replies: 0
Views: 287

Rack spacers on a de-powered zenki PS rack

Trying to get an understanding of what will work. The BV #2 kit has the most documentation but is also no longer available. Is the stopper that was included in it necessary for a de-powered zenki rack or was it meant for those wanting #2 kit but retaining PS? All of the similar rack spacers offered ...
by zokustyle
Tue Dec 19, 2017 2:26 pm
Forum: TECH: Corolla AE86
Topic: Bump steer after aw11 manual rack conversion
Replies: 21
Views: 3270

Re: Bump steer after aw11 manual rack conversion

As far as the spacers that go between the tie rod and knuckle, you're just able to further correct geometry with the suspension and steering that wasn't corrected with an RCA. I've been doing more reading on de-powering the power rack and am interested but also curious about angle difference like Je...
by zokustyle
Wed Nov 15, 2017 12:48 pm
Forum: TECH: Corolla AE86
Topic: Bump steer after aw11 manual rack conversion
Replies: 21
Views: 3270

Re: Bump steer after aw11 manual rack conversion

Other than finding a factory manual steering at a junkyard (impossible now?), where are we supposed to find an AE86 manual rack? Everyone has discontinued their remans.
by zokustyle
Mon Dec 26, 2016 5:49 pm
Forum: TECH: Corolla AE86
Topic: NEW STANCE XR1 COIL-OVERS (TRUE REAR TYPE)
Replies: 5
Views: 1581

Re: NEW STANCE XR1 COIL-OVERS (TRUE REAR TYPE)

The concern I have is that according that spreadsheet for XR1, their AE86 coilovers are no longer sold with inverted front or rear, as they've been advertised. Maybe email Stance and see what they have to say on that?

As far as reviews, I've heard awesome reviews of the latest with true type rear.
by zokustyle
Fri Aug 19, 2016 2:01 pm
Forum: TECH: Corolla AE86
Topic: Question COILOVER exp! Help!
Replies: 9
Views: 2563

Re: Question COILOVER exp! Help!

^Do you have a link by chance? I'm genuinely curious. Their site must be out of date because they still list the 8/6k rates and non inverted rear. (However, I did see a pic of the inverted rear coilovers in boosted86's build thread.) I also did a google search but can't find anything but the old se...
by zokustyle
Wed Aug 17, 2016 11:55 am
Forum: TECH: Corolla AE86
Topic: Question COILOVER exp! Help!
Replies: 9
Views: 2563

Re: Question COILOVER exp! Help!

My vote is with Stance. They did a lot of hands-on development with the AE86 and their newest inverted coilovers. I've talked with people that have run them and they do exactly what they should. They actually come with 8k front and 4k rear but they're also fully willing to consult on a custom setup ...
by zokustyle
Wed Jul 06, 2016 5:12 pm
Forum: AE86 Parts & Accessories
Topic: JDM Zenki Trueno Grille
Replies: 2
Views: 1140

Re: JDM Zenki Trueno Grille

Bump, price reduced!
by zokustyle
Wed Jun 29, 2016 4:12 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB: JDM Kouki Trueno Front Bumper
Replies: 0
Views: 331

WTB: JDM Kouki Trueno Front Bumper

Just need the bumper skin. It'll be painted so condition isn't too big of a concern. Willing to pay for shipping, located in Washington state.
by zokustyle
Mon Jun 06, 2016 12:32 am
Forum: Shops, Manufacturers, and Retailers Only
Topic: Group A 組 BODY SHOP / BODY KIT (Runfree Jblood, Vertex, etc)
Replies: 63
Views: 21421

Re: Group A 組 BODY SHOP / BODY KIT (Runfree Jblood, Vertex, etc)

They actively post on facebook. I've been interested in their FRP repro bumpers and I've been told "couple of weeks" since the beginning of april.
by zokustyle
Thu Jun 02, 2016 6:13 pm
Forum: AE86 Parts & Accessories
Topic: JDM Zenki Trueno Grille
Replies: 2
Views: 1140

JDM Zenki Trueno Grille

Really nice condition grille, never been painted or repaired. No cracks, all six clip retainers are 100% intact. Asking $325 shipped within the US.

Image
Image
by zokustyle
Mon May 23, 2016 6:22 pm
Forum: TECH: Corolla AE86
Topic: 6 speed adapter
Replies: 29
Views: 4813

Re: 6 speed adapter

SQ mentioned a shifter relocation but I haven't seen anything more. I'm dying for a J160 shifter relocation.
by zokustyle
Wed Feb 17, 2016 12:36 am
Forum: AE86 Parts & Accessories
Topic: Hood/dash/kouki fender trim/ eyelids/ etc. SOCAL
Replies: 12
Views: 2031

Re: Hood/dash/kouki fender trim/ eyelids/ ZETA 1 etc. SOCAL

Artis is the same basic shape as a Zeta, with identical waist measurements, Bride even advertises it that way. But Artis has always had a smaller left shoulder bolster for more comfortable shifting and handbrake in RHD cars. Artis Navi has the right shoulder smaller. If you have a label on the seat ...
by zokustyle
Tue Feb 16, 2016 6:46 pm
Forum: AE86 Parts & Accessories
Topic: Hood/dash/kouki fender trim/ eyelids/ etc. SOCAL
Replies: 12
Views: 2031

Re: Hood/dash/kouki fender trim/ eyelids/ ZETA 1 etc. SOCAL

That seat is actually an Artis if my research is correct. Artis has a smaller left side shoulder bolster. Technically rarer than Zeta!
by zokustyle
Sun Jan 17, 2016 12:46 am
Forum: Want to BUY (seeking sellers)
Topic: WTB: GTS Brake Proportioning Valve
Replies: 0
Views: 307

WTB: GTS Brake Proportioning Valve

Located in Washington. Thanks!
by zokustyle
Sat Jan 16, 2016 12:57 am
Forum: AE86 Parts & Accessories
Topic: FS: Beams Swap Parts
Replies: 0
Views: 474

FS: Beams Swap Parts

-3SGE Beams PS and AC pumps with brackets, idler, and belt. No leaks or damage, all in good shape. $50 plus shipping -3SGE Beams MT ECU: $100 plus shipping -3SGE Beams MT MAF: $75 plus shipping -3SGE Beams Lightweight Chromoly Flywheel. Very good shape, engine had a rear main leak so it's a little d...
by zokustyle
Fri Dec 25, 2015 6:58 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB: JDM Bumpers
Replies: 0
Views: 317

WTB: JDM Bumpers

Looking for zenki front, zenki rear would be awesome but I'll take kouki too.

Really just need the skin but if you have brackets, emblem, lights too I may be interested in them too.

Located in Washington state so shipping will have to be included.
by zokustyle
Mon Dec 07, 2015 12:43 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB: JDM Zenki Bumpers
Replies: 1
Views: 357

WTB: JDM Zenki Bumpers

Any condition is acceptable, really just need the skins themselves. If you've got brackets, lights, or anything else, I'd consider buying those too.

Located in Washington state.
by zokustyle
Mon Dec 07, 2015 12:39 pm
Forum: TECH: Corolla AE86
Topic: 3SGE Beams Header Routing
Replies: 8
Views: 1437

Re: 3SGE Beams Header Routing

Yep, that's what I'm asking to see.
by zokustyle
Sat Dec 05, 2015 1:09 am
Forum: OWNERS and BUILDERS
Topic: AE86 Original 20,000 Mile Car UPDATE!
Replies: 16
Views: 3326

Re: AE86 Original 20,000 Mile Car, Hidden and FOUND, Sneak P

zem wrote:
zem wrote:is the quarter panel on the other side bashed in?

i only ask because i think i saw his car on ebay a month or two ago, you got it for a nice price!


Yeah, it looks and sounds like the ebay car, I remember the auction. Clean car, just needed cosmetic help, if it is the same car.
by zokustyle
Sat Dec 05, 2015 1:06 am
Forum: TECH: Corolla AE86
Topic: Rear differential knock
Replies: 6
Views: 1138

Re: Rear differential knock

Super vague description. Give us more. Accel? Decel? Cruise? When turning? Type of noise? Speed of noise? Faster noises are generally pinion-related, lower, more rumbly noises are carrier bearings.
by zokustyle
Sun Nov 29, 2015 11:39 pm
Forum: TECH: Corolla AE86
Topic: 3SGE Beams Header Routing
Replies: 8
Views: 1437

3SGE Beams Header Routing

Mostly for those that kept the stock manifold, what was your solution for the 2-1 section around the steering column?

I have an idea of what needs to happen, I'd just like to see what you guys did.
by zokustyle
Wed Oct 28, 2015 10:59 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AG Won't Run/Dies Immediately
Replies: 7
Views: 1293

Re: 4AG Won't Run/Dies Immediately

That's a very good question, I bought the car with these symptoms... A further inspection shows that all fuses are good, grounds are intact, but the original COR was in the glovebox so I suspected the COR was jumped or something. I checked and there's a new aftermarket relay in place of the COR that...
by zokustyle
Sun Oct 25, 2015 2:08 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AG Won't Run/Dies Immediately
Replies: 7
Views: 1293

4AG Won't Run/Dies Immediately

'85 GTS: Cranks, fires for a second, then dies. Doesn't respond to throttle or unplugging things. Previous owner went over all the usuals: changed fuel pump, fuel filter, pulled COR and jumped fuel pump with a switch, replaced AFM. PO thought it was maybe FPR? Strange thing to me is that there's no ...
by zokustyle
Thu Oct 15, 2015 1:51 am
Forum: AE86 Parts & Accessories
Topic: ae86 parts for sale
Replies: 2
Views: 712

Re: ae86 parts for sale

Are the cusco mounts engine and/or transmission?
by zokustyle
Wed Oct 07, 2015 2:27 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB: GTS Fuel Pump Hanger/Bracket
Replies: 2
Views: 617

Re: WTB: GTS Fuel Pump Hanger/Bracket

Bump. Still looking.
by zokustyle
Fri Oct 02, 2015 1:34 am
Forum: Want to BUY (seeking sellers)
Topic: WTB: GTS Fuel Pump Hanger/Bracket
Replies: 2
Views: 617

WTB: GTS Fuel Pump Hanger/Bracket

I need the hanger assembly for the fuel pump. No lines, pump, or anything needed, just the hanger with vent, feed, return fittings.

The large one pictured:

Image
by zokustyle
Sun Sep 20, 2015 8:30 pm
Forum: TECH: Corolla AE86
Topic: 15x8 tire size for track purposes
Replies: 9
Views: 1642

Re: 15x8 tire size for track purposes

Yeah, I think you're really overestimating 4AG power and tire technology.
by zokustyle
Sun Sep 20, 2015 8:11 pm
Forum: OWNERS and BUILDERS
Topic: my 70,000 mile 1985 corolla gts zenki original
Replies: 14
Views: 4126

Re: my 70,000 mile 1985 corolla gts zenki original

I want your interior in the worst way...

Go to advanced search