What's the difference between the Megan Power vs Non Power Inner Tie Rod?
Are they both based on the oem inner tie rod + the 5mm spacer?
If i'm doing an AW11 manual rack swap into AE86.
do i need the megan inner tie rod plus the T3 steering rack spacer?
Search found 25 matches
- Thu Feb 15, 2024 10:21 pm
- Forum: TECH: Corolla AE86
- Topic: Megan Inner Tie Rod End
- Replies: 0
- Views: 1014
- Wed Feb 14, 2024 7:34 pm
- Forum: TECH: Corolla AE86
- Topic: JDM front brake caliper
- Replies: 1
- Views: 836
JDM front brake caliper
will a JDM front brake caliper work on a USDM ae86?
1985 corolla GTS
What's the difference with the JDM front brake caliper? I assume jdm front rotor will be needed to work with it?
1985 corolla GTS
What's the difference with the JDM front brake caliper? I assume jdm front rotor will be needed to work with it?
- Wed Feb 14, 2024 7:30 pm
- Forum: TECH: Corolla AE86
- Topic: Fuel Level Sensor Wire
- Replies: 1
- Views: 873
Fuel Level Sensor Wire
Hi guys,
Does anyone know where is the fuel level sensor dash connector wire.
Trying to make the fuel level sensor work on a AIM MXM dash.
1985 corolla gts
Does anyone know where is the fuel level sensor dash connector wire.
Trying to make the fuel level sensor work on a AIM MXM dash.
1985 corolla gts
- Fri Mar 23, 2018 6:47 pm
- Forum: 4A-GE Engine Parts
- Topic: 4age 20V Kelford 194 C Cam
- Replies: 1
- Views: 3990
4age 20V Kelford 194 C Cam
HI guys, I'm putting up for sale my Kelford 194-C Cam for the 4AGE 20V 194-C: 284/278 Duration, 9.30mm/8.50mm Lift. Racing camshafts to suit slightly modified engines, can run VVT or use adjustable gears to set fixed timing this is the most aggressive cam you can run and still retain the VVT tried 3...
- Fri Mar 23, 2018 6:03 pm
- Forum: 4A-GE Engine Parts
- Topic: MRP Oil Catch Can 2L Race Baffled
- Replies: 1
- Views: 3258
Re: MRP Oil Catch Can 2L Race Baffled
email randao85@gmail.com
or call 626 922 9378
or call 626 922 9378
- Fri Mar 23, 2018 6:02 pm
- Forum: 4A-GE Engine Parts
- Topic: MRP Oil Catch Can 2L Race Baffled
- Replies: 1
- Views: 3258
MRP Oil Catch Can 2L Race Baffled
selling a nearly new MRP Oil Catch Can 2L Race Baffled, made by MRP in New Zealand. internally race baffled and has a very high quality machined vent, this is a part made for pro race cars. product link is here https://www.mrpltd.co.nz/product/oil-catch-can-2l-race-baffled/ literally only had 100 mi...
- Sat Jun 03, 2017 2:34 pm
- Forum: AE86 Parts & Accessories
- Topic: jdm 4age header and complete exhaust system
- Replies: 4
- Views: 5322
Re: jdm 4age header and complete exhaust system
it has been sold
- Thu Jun 01, 2017 8:37 pm
- Forum: AE86 Parts & Accessories
- Topic: jdm 4age header and complete exhaust system
- Replies: 4
- Views: 5322
Re: jdm 4age header and complete exhaust system
i like to sell it complete please, thank you.
if you want to hear what it sounds like
here is a video clip, this is with a 16v motor, and no ITB
https://youtu.be/mI2sJxYdEaM
if you want to hear what it sounds like
here is a video clip, this is with a 16v motor, and no ITB
https://youtu.be/mI2sJxYdEaM
- Mon May 29, 2017 11:06 pm
- Forum: AE86 Parts & Accessories
- Topic: jdm 4age header and complete exhaust system
- Replies: 4
- Views: 5322
jdm 4age header and complete exhaust system
I'm selling the complete exhaust system from header to muffler, it came off of a JDM AE86 I imported with 4age 16v. I'm not sure of the exact brand, but the car was setup by a well known shop in Japan, and the exhaust sounded great. Header, mid piper with cat, and cat back exhaust. asking $600 for t...
- Wed Apr 19, 2017 6:15 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Help with 20v BT Vacuum Hoses for swap
- Replies: 6
- Views: 5479
Re: Help with 20v BT Vacuum Hoses for swap
does anyone still have the picture to this? this was super helpful in figuring out where everything goes.
- Mon Apr 17, 2017 11:05 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 4age 20v blacktop swap vacuum diagram
- Replies: 0
- Views: 2255
4age 20v blacktop swap vacuum diagram
Hi there,
does anyone have a detailed diagram of the 20v blacktop swap?
there used to be some good ones on the old forum but they can't be accessed any more.
Thank you
does anyone have a detailed diagram of the 20v blacktop swap?
there used to be some good ones on the old forum but they can't be accessed any more.
Thank you
- Wed Mar 29, 2017 6:52 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 20v blacktop oil catch can
- Replies: 13
- Views: 16653
Re: 20v blacktop oil catch can
the current oil catch can doesn't seem to be working correctly. this is a 20v blacktop with ITB I left the stock PCV connected to the vacuum block, then the rear cam cover port is connected to a vented Radium catch can. on the dyno, the catch can was blowing out fume vapor (although no oil in the ca...
- Tue Mar 07, 2017 4:52 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: new 20v build aggressive cam, weird idling sound
- Replies: 4
- Views: 4239
Re: new 20v build aggressive cam, weird idling sound
false alarm, it was just the timing belt touching a loose front lower cover =)
- Sat Mar 04, 2017 7:01 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: new 20v build aggressive cam, weird idling sound
- Replies: 4
- Views: 4239
Re: new 20v build aggressive cam, weird idling sound
that's the next thing the shop will check the piston to valve clearance and head clearance. but I like to think the cam was properly shimmed and degreed in according to the kelford spec sheet. assuming that's the case, and the fact that the noise frequency is quite rapid, seem to indicate it's somet...
- Fri Mar 03, 2017 7:37 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: new 20v build aggressive cam, weird idling sound
- Replies: 4
- Views: 4239
new 20v build aggressive cam, weird idling sound
finally got my 4age 20v engine done, but while the engine is idling, we are noticing some rather odd sounds, is this normal with the aggressive cam? any suggestions guys? here's the video while idling https://youtu.be/A32Uy_pC5as the engine is a 4age 20v blacktop, stock bottomend, cby ported head, k...
- Mon Aug 22, 2016 7:38 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 20v blacktop itb alpha-n haltech
- Replies: 2
- Views: 3794
20v blacktop itb alpha-n haltech
Hello ! I bought a Haltech Sprint 500 and looking to install this in a AE86 with 20v blacktop swap. I'm planning to use a fairly aggressive cam (Kelford Type C), so I've heard the map signal will not be accurate, and we should tune using Alpha-N Does anyone have information on how to setup Alpha-N o...
- Fri Aug 05, 2016 5:18 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 20v blacktop oil catch can
- Replies: 13
- Views: 16653
Re: 20v blacktop oil catch can
Thanks Jondee ! for your detailed response. After doing some more research, i'm thinking of leaving the stock PCV hose connected from front intake side of cam cover to the vacuum rail. Then connect a vent to atmosphere catch can to the rear of the cam cover. the catch can will be a radium can with t...
- Thu Aug 04, 2016 10:44 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 20v blacktop oil catch can
- Replies: 13
- Views: 16653
Re: 20v blacktop oil catch can
I'll be running a Haltech.
Is there a better way to run it?
Is there a better way to run it?
- Wed Aug 03, 2016 11:52 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: Mike Kojima made me cry
- Replies: 14
- Views: 10783
Re: Mike Kojima made me cry
he speak the truth but didn't have to be so harsh, lol
- Wed Aug 03, 2016 11:49 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: 20v blacktop oil catch can
- Replies: 13
- Views: 16653
20v blacktop oil catch can
Hi guys,
What's the best way to setup an oil catch can setup for a 20V blacktop with open velocity stack?
Is it best to retain the PCV valve or not?
This is for a race car, so preventing knock and reducing crank drag (from pressurizing the crank) would be the priority.
What's the best way to setup an oil catch can setup for a 20V blacktop with open velocity stack?
Is it best to retain the PCV valve or not?
This is for a race car, so preventing knock and reducing crank drag (from pressurizing the crank) would be the priority.
- Thu Jul 21, 2016 4:44 pm
- Forum: TECH: Corolla AE86
- Topic: supra fuel pump in ae86
- Replies: 3
- Views: 4193
supra fuel pump in ae86
Hi guys,
For those of you who have installed the MKIV Supra Fuel Pump in the AE86.
Is this a straight bolt on swap? What kind of mods are required?
Yes I will get the FPR, haltech ecu, and it's for a high comp 20v engine.
For those of you who have installed the MKIV Supra Fuel Pump in the AE86.
Is this a straight bolt on swap? What kind of mods are required?
Yes I will get the FPR, haltech ecu, and it's for a high comp 20v engine.
- Wed Jun 08, 2016 1:42 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: rhd ae86 20v velocity stack length
- Replies: 3
- Views: 6501
Re: rhd ae86 20v velocity stack length
Yes i wouldn't mind running a curved trumpet for the 4th cylinder, but where to get one?
What if i run cylinder 1 - 3 with 70mm, and 4 with 50mm? would that cause any issues i wonder?
What if i run cylinder 1 - 3 with 70mm, and 4 with 50mm? would that cause any issues i wonder?
- Wed Jun 08, 2016 11:59 am
- Forum: TECH: 4A-GE ENGINE
- Topic: rhd ae86 20v velocity stack length
- Replies: 3
- Views: 6501
rhd ae86 20v velocity stack length
Hi guys, I have a RHD 86 Levin, planning to swap in a BT 20V motor. I'm trying to figure out what's the best way to run velocity stacks on this car. I heard the max I can run is 70mm or 50mm with an individual filter? Due to clearance issue with the brake booster on RHD. But that would cause too muc...
- Fri Jun 03, 2016 6:39 pm
- Forum: TECH: Corolla AE86
- Topic: Socal Haltech Tuner
- Replies: 1
- Views: 2745
Socal Haltech Tuner
Hi guys !
Whose a good tuner for the 4AGE engine around Los Angeles area?
Looking to tune a haltech with 20v, high comp, cams.
Whose a good tuner for the 4AGE engine around Los Angeles area?
Looking to tune a haltech with 20v, high comp, cams.
- Wed Jun 01, 2016 10:42 pm
- Forum: Want to BUY (seeking sellers)
- Topic: WTB: BT 20V
- Replies: 0
- Views: 1563
WTB: BT 20V
Looking for a built 20V BT with ITB, let me know if you have one for sale
email "randao85@gmail.com"
email "randao85@gmail.com"