Search found 26 matches

by ae82hybrid
Sat Sep 17, 2016 12:58 pm
Forum: TECH: Corolla FWD / MR2
Topic: cv axle shaft
Replies: 7
Views: 1430

Re: cv axle shaft

In my opinion I've always found it more convenient to have the flange style axles than the solid ones, way easier to replace without having to take the axle out and lose fluid during the process with solid axles.
by ae82hybrid
Fri Sep 16, 2016 2:10 pm
Forum: TECH: Corolla FWD / MR2
Topic: cv axle shaft
Replies: 7
Views: 1430

Re: cv axle shaft

All of the fx16 that I've ever came across had flange type axles with 6 total bolt holes on both sides of the axles. The non-flange type are something that was just stuck into there from another corolla chassis, something from the ae92 chassis and is slightly longer, at least for the driver side axl...
by ae82hybrid
Wed Jul 20, 2016 6:48 pm
Forum: 4A-GE Engine Parts
Topic: 91 Smallport Harness and ECU
Replies: 8
Views: 1529

Re: 91 Smallport Harness and ECU

Cali, Fed or JDM?
by ae82hybrid
Wed Jul 13, 2016 6:04 pm
Forum: TECH: Corolla FWD / MR2
Topic: RIP ae82.net
Replies: 1
Views: 934

Re: RIP ae82.net

RIP ae82.net
by ae82hybrid
Sun Sep 27, 2015 3:30 pm
Forum: Automobiles for Sale
Topic: Fx16 gts hatch shell
Replies: 4
Views: 1666

Re: Fx16 gts hatch shell

What the original color of the car?
by ae82hybrid
Sun Sep 27, 2015 3:21 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB: 7A-FE 212mm Flywheel
Replies: 5
Views: 451

Re: WTB: 7A-FE 212mm Flywheel

I don't know who that white one belongs too. How much were you looking to sell the flywheel for? Don't recall any of the 4a-f coming with a 212mm flywheel but I guess anythings possible. Would have to line my clutch disk up to it to confirm unless you can confirm by measuring the matting surface is ...
by ae82hybrid
Thu Sep 24, 2015 4:55 pm
Forum: Want to BUY (seeking sellers)
Topic: WTB: 7A-FE 212mm Flywheel
Replies: 5
Views: 451

Re: WTB: 7A-FE 212mm Flywheel

I came across that but not really looking into a lightweight flywheel right now. Have a new 212mm oe clutch kit sitting around that I want to use for the time being since my 200mm performance clutch is going out. I'm located in Fresno California.
by ae82hybrid
Wed Sep 23, 2015 10:48 am
Forum: Want to BUY (seeking sellers)
Topic: WTB: 7A-FE 212mm Flywheel
Replies: 5
Views: 451

WTB: 7A-FE 212mm Flywheel

Looking to buy a Flywheel for 7a-fe, must be the 212mm flywheel.
by ae82hybrid
Fri Sep 11, 2015 7:45 pm
Forum: TECH: Corolla FWD / MR2
Topic: 1987 Corolla FX16 GTS Help
Replies: 4
Views: 1103

Re: 1987 Corolla FX16 GTS Help

There is no CARB exempt intake for these cars. You will have to replace it with the original intake arm, air box and filter. If you can't get a hold of the original one you can try to get one from a different year corolla and makeshift it to fit, that would work too. It just has to look factory.
by ae82hybrid
Wed Apr 08, 2015 8:57 am
Forum: TECH: 4A-GE ENGINE
Topic: build 7agze sc14 what strater ??
Replies: 5
Views: 865

Re: build 7agze sc14 what strater ??

stock starter is fine. hi you mean 7afe ?? i will go about 250-300ps is this starter good enougth ?? i want to go with w58 trans ( t50 is weak as we know ) i want to use 225-230mm flywheel from 4agze i have ( all engine ) from 4agze ae92 can i use it ?? The starter couldn't care less how much power...
by ae82hybrid
Wed Apr 08, 2015 8:56 am
Forum: TECH: Corolla FWD / MR2
Topic: AE92 with Civic radiator -- anyone done this?
Replies: 4
Views: 1639

Re: AE92 with Civic radiator -- anyone done this?

Never really seen it done but have heard of it, but just don't get ahead of yourself and start chopping away at brackets and welding new ones because when you get to the 4ag swap your probably gona be switching back to a 4a radiator due to the water outlet coming from the passenger side around the f...
by ae82hybrid
Sat Feb 28, 2015 6:49 pm
Forum: Want to BUY (seeking sellers)
Topic: Wanted To Buy; AE92 Smallport Misc Parts
Replies: 4
Views: 839

Re: Wanted To Buy; AE92 Smallport Misc Parts

Are you looking for spare parts for the Cali version or Fed version of the smallport, there is a difference in the two versions. For example the Cali version uses a secondary o2 sensor and EGR temp sensor, the Fed doesn't and the harness won't have connectors for it. So if running the Cali ECU on Fe...
by ae82hybrid
Thu Dec 11, 2014 2:25 pm
Forum: TECH: Corolla FWD / MR2
Topic: Got an 87' GTS FX-16 that needs an engine, what will fit?
Replies: 5
Views: 1080

Re: Got an 87' GTS FX-16 that needs an engine, what will fit

What's wrong with your engine that you have in there now, have you thought about a rebuild? As long as it's not a 90-91 4age smallport any of the older large port should be a direct drop right in and everything should hook right up, unless your unlucky and you get the 6 bolt crank 4ag then you will ...
by ae82hybrid
Thu Dec 11, 2014 2:19 pm
Forum: TECH: Corolla FWD / MR2
Topic: aw11 supercharged alternator
Replies: 6
Views: 1156

Re: aw11 supercharged alternator

The supercharger engine uses a different alternator due to it being relocated on the opposite side of the engine, the part number from pepboys for the supercharged engine is 14453 and it will be a special order part if they can still get a hold on one. Hope this helps.
by ae82hybrid
Fri Oct 31, 2014 8:25 am
Forum: TECH: Corolla FWD / MR2
Topic: 1987 FX16 - What is this?
Replies: 4
Views: 1127

Re: 1987 FX16 - What is this?

Took mines off since I have no more a/c and just capped it off at the intake air duct and throttle body.
by ae82hybrid
Sat Oct 04, 2014 11:40 am
Forum: TECH: Corolla FWD / MR2
Topic: C160 transmission 6speed
Replies: 5
Views: 1554

Re: C160 transmission 6speed

LSD?
by ae82hybrid
Sat Oct 04, 2014 11:39 am
Forum: TECH: Corolla FWD / MR2
Topic: Swaping c160 with a c60
Replies: 3
Views: 918

Re: Swaping c160 with a c60

Why not just have the c160 rebuilt, it shifts a lot crispier than the c60 and doesn't have the reverse gate issues.
by ae82hybrid
Wed Sep 03, 2014 4:20 pm
Forum: TECH: Corolla FWD / MR2
Topic: check engine light won't reset - no bad codes
Replies: 3
Views: 1304

Re: check engine light won't reset - no bad codes

I've had an issue like this before where my CEL stayed on constantly and there was no DTC present. It turned out to be a electrical problem in the interior harness leading to the ECU, you might not be having the same electrical problem or an electrical problem at all but for my issue it turned out t...
by ae82hybrid
Sun Nov 03, 2013 3:21 pm
Forum: TECH: Corolla FWD / MR2
Topic: Bigport to Small Port Compatibility
Replies: 6
Views: 1291

Re: Bigport to Small Port Compatibility

BP distributor will fit and work, the starter will work, BP injectors will work as long as your using the SP fuel fail because the spacing of the rails are different.
by ae82hybrid
Sat Oct 26, 2013 8:27 am
Forum: TECH: Corolla FWD / MR2
Topic: 4age engine swap 88 to 90-91
Replies: 8
Views: 1324

Re: 4age engine swap 88 to 90-91

The engine harness and interior harness are different, especially at some of the connectors such as dizzy and ecu, you will need the harnesses if your planning on doing a clean swap over to the 90-91 smallport 4ag.
by ae82hybrid
Thu Sep 19, 2013 10:18 am
Forum: TECH: Corolla FWD / MR2
Topic: FX16 transmission/axle questions...
Replies: 4
Views: 865

Re: FX16 transmission/axle questions...

I would say try to get a good spare tranny on the side or save up to get another tranny because these tranny will start to give you issue if you arn't already having them such as 2nd and 3rd gear grinding and 5th gear popping out.
by ae82hybrid
Thu Sep 19, 2013 10:11 am
Forum: TECH: Corolla FWD / MR2
Topic: FX16 transmission/axle questions...
Replies: 4
Views: 865

Re: FX16 transmission/axle questions...

Pulling issue could be a result of many different problems happening to the vehicle such as tire separation, alighnment issues, worn suspension parts, brakes if pulling when braking. The only bearing between the transmission and cv axle is the internal differential bearing. Try flip flopping both fr...
by ae82hybrid
Tue Sep 17, 2013 2:11 pm
Forum: TECH: Corolla FWD / MR2
Topic: FX16 transmission/axle questions...
Replies: 4
Views: 865

Re: FX16 transmission/axle questions...

The FX axles are a 2 piece axle for both driver and passenger side, you have the axle shaft assymbly and then you have the axle stub (6 stud tulip). If your passenger side doesn't have the removable stub then someone might have changes it out for a newer year corolla cv axle which are one piece assy...
by ae82hybrid
Mon Jul 29, 2013 6:03 pm
Forum: TECH: 4A-GE ENGINE
Topic: Frankenstein 4A-GE smallport questions
Replies: 3
Views: 976

Re: Frankenstein 4A-GE smallport questions

Any AFM from the 88 ae92 and up should work correctly, the only thing is that the smallport uses a knock sensor and 4 wire o2 sensor. If the 4a block that you are using has a place for the knock sensor then you are good. I think at one time I used the blue top AFM and the engine ran fine, give it a ...
by ae82hybrid
Thu Apr 18, 2013 10:38 pm
Forum: TECH: 4A-GE ENGINE
Topic: C56 vs C160
Replies: 5
Views: 2060

Re: C56 vs C160

C160 ftw..no doubt about it, ask me how I know...shorter gearing will give it much faster acceleration out the hole and will leave the c56 in the dust in the 1/4 mile...c56 will only out top speed the c160 in mph in the long run.

Go to advanced search