Hey club4ag. I was hoping to gain some advise on my exhaust sytem set up. My kp61 has 4ag with weber side drafts. stock cams, a little over bore. The current exhaust is obx header to a straight-thru resonator 2.25" over axel to a random stainless straight-thru muffler. Im old now and would like...

Finally back on the road! Thanks for the information, support and help.

I installed a new slave cylinder and flex hose with a banjo bolt. I also adjust the play on the pedal a little. Now the shifting is better than before.

Short update: I was short on my guessimate, my slave cylinder output is only 1/4". Now i'm crossing off the clutch components as a problem. My new oem unit does not arrive until Wednesday. Another question: Does anyone install banjo bolts to their slave system? My header ends up real close to m...

Thank you for the travel distance information. I will do an exact measurement to verify. I'm not sure about disengaging versus dragging. When the clutch is in and i try to shift into gear the car will start to roll forward. While running the tranny does not want to shift into reverse. It grinds but ...

Can someone offer an opinion on the travel distance? What should it be? Is half inch enough? Anyone with a ae86 observe there slave cylinder movement of the fork? I appreciate the responses. The service manual links are great but did not have a specficication. I had pulled my tranny last weekend to ...

I need the specifications on the ae86 slave cylinder travel distance. My search on the net has yielded nothing useful. I'm getting about .5 of inch throw... But its not enough? Check this video ... https://docs.google.com/file/d/0B6kwW2vXB66DS3haRl9wMWVUUzg/edit?usp=sharinghttps://docs.google.com/fi...