Search found 285 matches

by jdm86gtz
Thu Oct 19, 2017 1:28 pm
Forum: OWNERS and BUILDERS
Topic: Racecar: ITA AE86 with provenance(history)
Replies: 33
Views: 1477

Re: Racecar: ITA AE86 with provenance(history)

Those Trueno front bumper lamps have been tinted as they should be a similar colour to the side repeater.
by jdm86gtz
Thu Oct 19, 2017 5:54 am
Forum: TECH: 4A-GE ENGINE
Topic: Weird Radiator Problem
Replies: 11
Views: 403

Re: Weird Radiator Problem

The fan switch should be on the lower hose so that when the coolant leaving the radiator (at the bottom) is too hot the fan turns on.
by jdm86gtz
Wed Oct 18, 2017 4:33 am
Forum: TECH: Corolla AE86
Topic: RHD Conversion
Replies: 11
Views: 431

Re: RHD Conversion

Sell LHD car and buy RHD car.
by jdm86gtz
Fri Sep 22, 2017 3:01 pm
Forum: TECH: 4A-GE ENGINE
Topic: 500+ hp on stock bluetop cams?
Replies: 35
Views: 1417

Re: 500+ hp on stock bluetop cams?

Not 4/7AGE but interesting nonetheless, RB has 86mm bore with a much shorter 73mm stroke Pushing a stock RB26: Part 1 https://www.youtube.com/watch?v=7uypfBv9Dbc&index=1&list=PLc2IxK6IgrGBn4EN9x4gXeukTpqjJY4ll Part 2 https://www.youtube.com/watch?v=6uZEMnB72Kk&index=2&list=PLc2IxK6Ig...
by jdm86gtz
Thu Sep 21, 2017 5:57 am
Forum: TECH: 4A-GE ENGINE
Topic: 500+ hp on stock bluetop cams?
Replies: 35
Views: 1417

Re: 500+ hp on stock bluetop cams?

Subscribed.
What ever happened to this project? http://www.sdsefi.com/features/jan064ag.htm It ended up with a sleeved block and I think the last update was shimming the valves then maybe the forum crashed.
by jdm86gtz
Thu Sep 14, 2017 2:00 pm
Forum: TECH: Corolla AE86
Topic: rear end bearings
Replies: 9
Views: 431

Re: rear end bearings

The listed numbers are bearing sizes so you don't even have to buy Koyo brand bearings if you don't want, especially if it's only for a temporary setup.
by jdm86gtz
Wed Aug 30, 2017 4:53 am
Forum: TECH: Corolla AE86
Topic: Steering rack woes
Replies: 7
Views: 565

Re: Steering rack woes

You aren't running RCAs with full length dampers by any chance?
by jdm86gtz
Tue Aug 29, 2017 6:09 am
Forum: TECH: Corolla AE86
Topic: Steering rack woes
Replies: 7
Views: 565

Re: Steering rack woes

I used an '83 Trueno GT Apex chassis number and my '87 Trueno GT Apex chassis number for comparison on the Toyota EPC. 45503-19015 is 83-87 manual racks and 83-85 P/S racks, both are quantity 2 so no left or right. 45503-19025 is 85-87 P/S racks also quantity 2. Then for the outers it seems that nor...
by jdm86gtz
Sun Aug 20, 2017 5:28 am
Forum: TECH: 4A-GE ENGINE
Topic: excessive oil pressure on fresh engine rebuild
Replies: 17
Views: 949

Re: excessive oil pressure on fresh engine rebuild

I get about 90 psi max on 2 of my 16v engines (6kg/cm2 on gauge) both with the later type AE92/101 pumps.
I think when cold around 50-60 psi and around 30 psi at idle when up to temperature.
by jdm86gtz
Fri Aug 04, 2017 6:01 am
Forum: TECH: 4A-GE ENGINE
Topic: Silvertop to blacktop camshaft conversion
Replies: 2
Views: 281

Re: Silvertop to blacktop camshaft conversion

I ran blacktop cams in a silvertop, just adjust the shims to suit the different cams and away you go.
by jdm86gtz
Sat Jul 01, 2017 1:48 pm
Forum: TECH: 4A-GE ENGINE
Topic: Starting my 20v blacktop
Replies: 9
Views: 1060

Re: Starting my 20v blacktop

Have you 12V on the black/white wire at the coil and igniter with the key in the run/on position?
A quick check to see if the ecu is powered up is check for 5V on the yellow wire of the MAP sensor and TPS sensor.
by jdm86gtz
Fri May 12, 2017 5:36 am
Forum: TECH: 4A-GE ENGINE
Topic: Hi, 20v st (bt electronic)
Replies: 17
Views: 1606

Re: Hi, 20v st (bt electronic)

If you have a timing light you can mark the intake pulley on the belt side and the cam side and even free revving you will see the pulley move when you shine the timing light at the pulley (timing light pickup on no.1 plug lead) The blacktop VVT works early in the revs whereas the silvertop VVT is e...
by jdm86gtz
Wed May 10, 2017 5:27 am
Forum: OWNERS and BUILDERS
Topic: "Kentucky AE86: A Levin Story"
Replies: 86
Views: 6437

Re: "Kentucky AE86: A Levin Story"

Rear end vibration is most likely due to an aftermarket lsd. If you feed in a bit more power the lsd should lock and the inner tyre will slip instead.
by jdm86gtz
Sat May 06, 2017 9:14 am
Forum: TECH: 4A-GE ENGINE
Topic: AE86 Thermostat
Replies: 4
Views: 603

Re: AE86 Thermostat

AE86 uses the paper gasket and AE92 uses the O-Ring
by jdm86gtz
Wed Apr 19, 2017 1:34 pm
Forum: TECH: Corolla AE86
Topic: Can I use a Levin Engine bay harness on a Trueno?
Replies: 3
Views: 463

Re: Can I use a Levin Engine bay harness on a Trueno?

The Levin harness won't have the pop up light wiring and the connectors on either end might not suit your cars footwell junction boxes
by jdm86gtz
Mon Apr 17, 2017 5:18 am
Forum: TECH: Corolla AE86
Topic: Flip Headlight Issue
Replies: 10
Views: 1306

Re: Flip Headlight Issue

Auckword1 is saying to adjust the motor crank arm. Loosen the nut, the arm is on a spline so rotate until in the correct position and tighten up the nut again. Is this something that just happened or a problem since you bought the car? Here's a picture of a motor but I'm not sure of the correct cran...
by jdm86gtz
Mon Apr 17, 2017 5:12 am
Forum: OWNERS and BUILDERS
Topic: My Beams Swap build thread
Replies: 10
Views: 1395

Re: My Beams Swap build thread

Generally Toyota use the following
M6: 6mm x 1mm
M8: 8mm x 1.25mm
Fine 10mm: 10mm x 1.25mm
Fine 12mm: 12mm x 1.25mm
by jdm86gtz
Thu Mar 23, 2017 2:02 pm
Forum: TECH: 4A-GE ENGINE
Topic: 4AGE Coolant Neck Question
Replies: 4
Views: 583

Re: 4AGE Coolant Neck Question

If you have the AE86 GTS water pump, fit the AE92 thermostat housing to it.
One of my friends did it years ago to switch electric fans.
by jdm86gtz
Tue Mar 07, 2017 4:43 am
Forum: TECH: 4A-GE ENGINE
Topic: Distributor Identification
Replies: 5
Views: 664

Re: Distributor Identification

Looks like a 1UZ-FE distributor cap
by jdm86gtz
Sat Mar 04, 2017 5:06 am
Forum: TECH: 4A-GE ENGINE
Topic: new 20v build aggressive cam, weird idling sound
Replies: 4
Views: 578

Re: new 20v build aggressive cam, weird idling sound

What did you set the valve clearances to?
by jdm86gtz
Sat Mar 04, 2017 4:41 am
Forum: TECH: 4A-GE ENGINE
Topic: 4AG turbo recommendations?
Replies: 6
Views: 690

Re: 4AG turbo recommendations?

I run a T25G turbo from an S13 SR20DET on mine and it's a good match, you have the scope for lots of upgrades with a T25 flange and I got the turbo for about $100.
by jdm86gtz
Fri Feb 10, 2017 10:41 am
Forum: TECH: Corolla AE86
Topic: Coupe side glass install questions
Replies: 3
Views: 464

Re: Coupe side glass install questions

The above with grey clips is for a hatch. For a coupe the 3 yellow clips go along the bottom, the 3 green clips are on the B pillar and the 5 black clips go up the C pillar and on top of the glass. I only looked into this last week myself using the EPC with part numbers of the coloured clips to see ...
by jdm86gtz
Sat Feb 04, 2017 6:08 am
Forum: OWNERS and BUILDERS
Topic: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p
Replies: 136
Views: 13075

Re: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p

Nicely done as Jay Leno would say.
Looking forward to videos and some power figures.
by jdm86gtz
Thu Feb 02, 2017 5:21 am
Forum: TECH: 4A-GE ENGINE
Topic: Fubar Toda Cams
Replies: 9
Views: 958

Re: Fubar Toda Cams

Those cam pulleys are not for a Toyota, look to be Nissan maybe RB or CA engine type.
by jdm86gtz
Wed Jan 25, 2017 1:43 pm
Forum: TECH: Corolla AE86
Topic: AE86 different power steering racks?
Replies: 5
Views: 735

Re: AE86 different power steering racks?

http://image.superstreetonline.com/f/15 ... g_rack.jpg

From their project car, looks similar to yours
by jdm86gtz
Wed Jan 25, 2017 1:35 pm
Forum: TECH: Corolla AE86
Topic: AE86 different power steering racks?
Replies: 5
Views: 735

Re: AE86 different power steering racks?

In RHD cars the left rack is for early cars and right rack is for late cars(or at least those styles anyway)
by jdm86gtz
Sat Jan 14, 2017 2:52 pm
Forum: TECH: Corolla AE86
Topic: Reverse light bulbs
Replies: 7
Views: 838

Re: Reverse light bulbs

LEDs??? Search for 7506 LED bulbs
by jdm86gtz
Thu Jan 12, 2017 1:28 pm
Forum: TECH: 4A-GE ENGINE
Topic: Smallport Head
Replies: 2
Views: 410

Re: Smallport Head

The 3 main bolts thread into the engine block, there are two 8mm bolt holes in the head for an additional mount bracket.
by jdm86gtz
Tue Dec 27, 2016 3:29 pm
Forum: OWNERS and BUILDERS
Topic: Gonna start a build and see where it goes ===> TWINSCREW !!! :-p
Replies: 136
Views: 13075

Re: Gonna start a build and see where it goes :-P

Bit of a Xmas update. Have added some pics on Page 1... http://club4ag.com/forums/viewtopic.php?f=7&t=18729&p=120395#p120395 Scroll down for the latest :) Cheers... jondee86 The AE101/111 throttle 20V cable is approximately 2" longer than the RHD AE86 throttle cable, but I can't rememb...
by jdm86gtz
Mon Dec 26, 2016 11:42 am
Forum: TECH: Corolla AE86
Topic: LSD question
Replies: 12
Views: 1371

Re: LSD question

You should only have to cut the axles for an OEM lsd, TRD and Cusco lsds don't require it anyway

Go to advanced search