Search found 10 matches
- Fri Dec 06, 2013 8:56 pm
- Forum: TECH: Corolla FWD / MR2
- Topic: Anti-lock Braking System (ABS)
- Replies: 14
- Views: 10403
Re: Anti-lock Braking System (ABS)
If you cannot control you car in ANY situation/weather condition without abs then you cannot ever be a good driver. A real driver does not need abs. Please learn how to control your car without abs. After you do so, please feel free to instal that crap onto your car, after you learn how to drive wit...
- Thu Nov 28, 2013 9:59 am
- Forum: TECH: 4A-GE ENGINE
- Topic: is this possible, 4ac oil pump on a 4age block?
- Replies: 6
- Views: 5733
Re: is this possible, 4ac oil pump on a 4age block?
The 4ac and the 4age use the same type oil pump that mounts behind the crank pulley/lower timing belt sprocket.
Would you be able to take a picture of the part you are asking about?
Would you be able to take a picture of the part you are asking about?
- Sun Nov 24, 2013 8:46 pm
- Forum: TECH: Corolla AE86
- Topic: gts vs sr5 bellhousing. difference visually?
- Replies: 7
- Views: 6025
Re: gts vs sr5 bellhousing. difference visually?
If you had the bellhousing installed in a car then, GT-S will have the clutch fork hole on the passenger side. SR-5 will have it on the driver side.
- Wed Nov 20, 2013 4:06 am
- Forum: TECH: 4A-GE ENGINE
- Topic: Have parts for 16v 4AGE, What do I do from here?
- Replies: 20
- Views: 11932
Re: Have parts for 16v 4AGE, What do I do from here?
so I'm moments away from dropping the engine with a few complications with the axle...tough as nails bolts and nuts, tried a impacter didn't work. I went to finish the engine but it came to a standstill because the next step is installing the head bolts...the shop gave me head bolts for a freaking ...
- Tue Nov 19, 2013 12:59 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: I swapped bluetop for bluetop now engine wont stay running?
- Replies: 7
- Views: 5735
Re: I swapped bluetop for bluetop now engine wont stay runni
Hello again jondee86.
Is that ground near the battery by any chance?
I cant really tell from that pic but I just searched around until I found some random black wire with a frayed end and it turned out to be the ground for the afm. Car is running now.
Thanks for your help guys, I mean it
Is that ground near the battery by any chance?
I cant really tell from that pic but I just searched around until I found some random black wire with a frayed end and it turned out to be the ground for the afm. Car is running now.
Thanks for your help guys, I mean it
- Tue Nov 19, 2013 9:53 am
- Forum: TECH: 4A-GE ENGINE
- Topic: I swapped bluetop for bluetop now engine wont stay running?
- Replies: 7
- Views: 5735
Re: I swapped bluetop for bluetop now engine wont stay runni
Hello yoshimitsuspeed. I believe the afm is good because I have 2 known working afm's and the one from the mr2 but the problem is there with all of them. I couldn't find the fuel pump bypass so I just wired the fuel pump to the battery and it works, the engine will stay running now but of course I c...
- Mon Nov 18, 2013 5:41 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: I swapped bluetop for bluetop now engine wont stay running?
- Replies: 7
- Views: 5735
Re: I swapped bluetop for bluetop now engine wont stay runni
Hello jondee86.
The only time fuel comes out of the return line is when I first crank the engine a burst of fuel lasting for about one second comes out.
Also I tried the AFM flap trick and it does not activate my fuel pump.
The only time fuel comes out of the return line is when I first crank the engine a burst of fuel lasting for about one second comes out.
Also I tried the AFM flap trick and it does not activate my fuel pump.
- Mon Nov 18, 2013 12:42 pm
- Forum: TECH: 4A-GE ENGINE
- Topic: I swapped bluetop for bluetop now engine wont stay running?
- Replies: 7
- Views: 5735
I swapped bluetop for bluetop now engine wont stay running?
Hey guys. I hope you can help me figure this out. I have a 1985 gt-sr5 that I built a few years ago and the engine recently has really low compression but ran so I put in a 1986 mr2 4age with good compression. I then reconnected all electrical lines exactly as they were. I have a FSM so I used the p...
- Fri Mar 08, 2013 9:13 pm
- Forum: Fun Talk
- Topic: ****Club4AG Report Problems here! 8/16/2013***********
- Replies: 125
- Views: 131405
Re: ****Club4AG Report Problems here!***********
Where is all the old info? This site has been around for years but no post seems older than January 2013. Even my join date says Jan, 11, 2013 but there is no way, I joined in like 2004 or 2005. I don't come around here much any more, so I don't know what happened, but where is the thread explaining...
- Tue Jan 15, 2013 9:34 pm
- Forum: Fun Talk
- Topic: Ryoji Takada
- Replies: 1
- Views: 3061