Techno Square was founded by Rich and Howard Watanabe as a professional source for racing development needs and have in the past worked with a very respectable list of operations.   With a rich history of preparing vehicles in Japan and USA, Techno Square will cater to a almost any demands you may have for your vehicle preparations.  Not overly exposed as such, they are the key to many racing teams in the West Coast for preparation of competition race cars, drag racers, and custom street cars.

Drift Association LLC have partnered with them to design a set of entry-level driver protection bars in the form of a 4 point impact protection cage.

This Tandem Drift - Driver Protection System will suffice the minimal needs to attend and participate in any Drift Association Competition events and Drift day practice events  that require tandem or multi-car formation drifting.  Made from high quality materials that we demand, DOM Mild Steel 0.120 tubing OD 1.75" for hoop and 0.095 1.75 for the door beams.  This is designed primarily for door intrusion protection and drift-related side collisions.

The following photos are example of the "Techno Square custom installed 4 Point Tandem Drift Driver Protection Bars"

Bolt-in kit to prevent changes to body metal weakening, and reinforced under the floor.  Hoop area is further back than standard roll cages to allow for more safety in daily driven use without a helmet, outside of drifting use.  Custom tailored to the car and designed by Techno Square for your specific needs.

Sub-floor bracing to minimize pull-out in collisions.

minimal interior removal or modifications.

Of course, traditional 6 point certified cages that exceed this specifications list will both be legal and can be designed and /or installed by Techno Square. 

In addition, Techno Square can provide a wide range of services for your street and drift use vehicles, such as race car chassis preparations such as spot welding, reinforcing, and custom design suspensions and installations.

  Factory ECU Reprogramming for Toyota ECU

• ECU re-programming by Techtom's technologies, that include re-progr4amming of factory ECU as well as aftermarket ECU is another specialty.  They have recently succeeded programming of Freedom ECU and building of a special spec 4A-GE 20 valve for Taka's Toyota Corolla...to 190hp.    A walk in the park, for people who have built engines for TRD, and other racing operations catering from Pikes Peak to IMSA.
• Ability to re-program or re-tune factory Toyota ECU for changes needed with hardware modifications, where all sensors are intact.  (i.e. modifications to internals or camshaft profiles can be tuned to maximum efficiency or as customer prefers)
• 4A-GE specialists in racing operations, Mr.Nagata is an in-house AE86 enthusiast... as well as an ECU technician for Techtom.

Contact: Nagata or Watanabe

Techno Square, 22521 Normandie Avenue, Torrance, CA 90501

Telephone (310)787-0847